Shipping List
Kit 1
1pcs * MKS SBASE V1.3
1pcs * MKS TFT35
1pcs * MKS WIFI
1pcs * Filament Sensor
3pcs * Endstop
1pcs * USB
1pcs * Falt cable
1pcs * Screwdriver
Kit 2
1pcs * MKS SBASE V1.3
1pcs * MKS TFT35
3pcs * Endstop
1pcs * USB
1pcs * Falt cable
1pcs * Screwdriver
Name: Smoothieboard MKS SBASE V1.3
Features
- Support highly modular open source firmware Smoothieware.
- Easy to edit config.txt file. No complicate firmware editing necessary.
- Fully supports network functionality. Besides the regular USB connection an Ethernet network cable can be connected directly to a network for browser control. Board IP address can be configure in config.txt.
- Setcurrent directly on config ,protect driver or potentiometer from getting burned when adjust the current.
- This circuit board with high-quality 4-layer and better heatsink.
- Using a dedicated power supply chip, stably ensure power output.
(Please note that MKS SBASE can't work with OLED12864 and LCD2004 display.)
More features as following
Wiring
PINOUT
How to use
1.Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
. Need to change config name .
For example:
Change 
into 
.2. Adjust config.txt according to the configuration .
3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.
4.Plug the SD card to the board, after power on, it will automatic update .
5.If connect computer with USB, need to install the driver (Refer to below specification ).
Install the Driver
First, you should upload the zip file.
Then, plug the USB to computer . Next, enter device manger .
Then will turn up COM after install successfully.
Download Firmware and Update
Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update .
After successful updated, the file name will turn into firmware.cur.
How to Adjust Driver Current
Following picture shows how to check the Vref.
Name: MKS TFT35 Touch Screen
Features
1. 7 type languages online switching.
2. Preview G-code model, display model on printing.
3. Inbuilt 32 bit high speed ARM chip.
4. 3.5 inch touch screen, simple operating interface, high sensitivity.
5. Support WIFI remote control, you may monitor via APP or PC.
Available for Android and IOS system.
6. Easy to update firmware by SD card.
7. Easy to replace into your logo and customize 13 commands .
8. Support printing from breakpoint,power cut detecting,printing save,
outage detecting and auto off function.
9. Supports Marlin, Smoothieware.
Wiring
Size
How to Wire Filament Sensor to MKS TFT35
Wire on TFT35 PB1 pins.
Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item
Please according to you to buy the dress fabric, select the corresponding fabric color chart
Product reviews can be carried out after the member login, please
click here to login
USD
