Your position: Home / Accessories / Modules

MAX31855 thermocouple

(500 available)
Please select the information you wantX
  • Description
  • Size Chart
  • Measurement
  • Color Chart
  • Reviews

Name: MAX31855 thermocouple module 
1.The K-type thermocouple module  is fully consistent  with the official version
2. Due to a small number of production and small difficulty on welding,
Introduction :
1. Range:-200C~1350C ;
2.Suitable for probe , K-type thermocouple, this module does not include
  other  accessories ,  please purchase yourself .
3.SPI connector , high speed transmission
4. Input voltage : 3-5VDC
5. Temperature value outputs digitally , which does not need amplifier  as well as ACD.
6. 14 resolution, 0.25C temperature accuracy 
7.Size : 20mm *23mm ;  the distance of location hole: 15mm ; diameter: 3mm
Thermocouples are very sensitive, requiring a good amplifier with a
cold-compensation reference. The MAX31855K does everything for you, 
and can be easily interfaced with any microcontroller, even one
without an analog input. This breakout boardhas the chip
itself, a 3.3V regulator with 10uF bypass capacitors and level 
shifting circuitry, all assembled and tested. Comes with a 2 pin
terminal block (for connecting to the thermocouple) and pin
header (to plug into any breadboard or perfboard).
New! Now uses the MAX31855K instead of the MAX6675,
so it can measure a wider temperature measurement range.
Please note! The MAX31855 is not pin compatible or drop-in code
compatible with the MAX6675. We do have an Arduino library
for both chips but you'll need to adjust any existing MAX6675
designs for the mew MAX31855. The MAX6675 has been
discontinued by Maxim.

Version 2.0 now includes ferrite beads and filter capacitor onboard for better stability
1. Works with any K type thermocouple
2. Will not work with any other kind of thermocouple other than K type
3. -200C to+1350C output in 0.25 degree increments-note
   that K thermocouples have about ±2C to ±6C accuracy .
4. Internal temperature reading.
5. 3.3 to 5v power supply and logic level compliant!
6. SPI data output requires any 3 digital I/O pins.
Cogfig Setting
temperature_control.hotend.enable            true             # 
#temperature_control.hotend.thermistor_pin    0.24             # 
temperature_control.hotend.chip_select_pin    0.16
temperature_control.hotend.spi_channel         0    # SPI channel 0 or 1
temperature_control.hotend.heater_pin        2.7              # 
#temperature_control.hotend.thermistor        RRRF100K         # 
temperature_control.hotend.sensor        max31855  
temperature_control.hotend.set_m_code        104              #
temperature_control.hotend.set_and_wait_m_code 109            #
temperature_control.hotend.designator        T                #

Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item

Please according to you to buy the dress fabric, select the corresponding fabric color chart

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login