Packing List
Kit 1
1 * MKS SGEN-L
1 * MKS TFT24
1 * MKS WIFI
1 * USB
1 * Flat Cable
3 * Endstop
Kit 2
1 * MKS SGEN-L
1 * MKS TFT24
1 * USB
1 * Flat Cable
3 * Endstop
Name: MKS TFT24 Touch Screen
MKS TFT24 is a colorful touch screen which is used independently on 3d printer.
This display is no need to set mainboard firmware but work together directly.
And it is easy to replace into your logo and edit your local language.
Powerfully,it is capable to wirelessly control 3D Printer and support Cloud printing.
More, it is available to self-define up to 13 commands .
More features as follows:
Wiring
Size
How to assemble with mainboard.
Set the baud rate, ensure both TFT and controller board are the same.
1.MKS Series mainboards
Such as, MKS SBASE,MKS MINI,MKS GEN,MKS BASE, MKS GEN L,etc.
(MKS TFT24 is not available with Ramps1.4)
Flash firmware to mainboard .( TFT display has updated latest config inside already).
Connect TFT display to AUX-1 of the board.
No need to configure on board firmware,they will work together directly after wire.
The boards need a external 12V power supply.
2.Firmware Upgrade
Please copy following documents to the root of SD card.
(Please don't edit the documents name.)
mks_pic mks_config mkstft24
Then, plug the SD card to the TFT and power on. It will update automatically.