Your position: Home / Motherboard

MKS SBASE V1.3

B08
Price:
USD
$45.00
    Please select the information you wantX
Quantity:
-
+
(7879 available)
  • Description
  • Size Chart
  • Measurement
  • Color Chart
  • Reviews
Name:   Smoothieboard MKS SBASE V1.3 
 
 
Packing List
 
1pcs * MKS SBASE  V1.3
1pcs * USB
3pcs * Endstop
1pcs * Screwdriver
 
 
Features 
  • Support highly modular open source firmware Smoothieware. Easy to edit config.txt file. No  complicate firmware editing necessary.
  • Fully supports network functionality. Besides the regular USB connection an Ethernet network cable can be connected directly to a network for browser control. Board IP address can be configure in config.txt.
  • Setcurrent directly on config ,protect  driver or potentiometer from getting burned when adjust the current.
  • This circuit board with high-quality 4-layer and better heatsink.
  • Using a dedicated power supply chip, stably ensure power output.
  (Please note that MKS SBASE can't work with OLED12864 and LCD2004 display.)
 
More features as following
 
sbase

 

 

Wiring

 

SBASE_

 

 

 MKS SBASE Size 
 

MKS SBASE-size

 

PINOUT

pin

 

How to use
 
1.Copy "firmware.bin" and "config" from config file to SD card (SD smaller than 64Gb)
 . Need to change config name .

For example:
Change  21  into   23
.2. Adjust config.txt according to the configuration .
3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.
4.Plug the SD card to the board, after power on, it will automatic update .
5.If connect computer with USB, need to install the driver (Refer to below specification ).
 
Install the Driver
First, you should upload the zip file.
Then, plug the USB  to computer . Next, enter device manger .
Then will turn up COM after  install successfully.
 
Download  Firmware and Update
Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update .
After successful updated, the file name will turn into firmware.cur.

 

How to Adjust Driver Current.
 
Caution!
Please mind the power polarity and  drivers direction.
Please don't put the drivers or motors on/off while power on.
Please disconnect all motors when adjust driver current.
 
A4988(1amp)
I= vref /1.6,default Vref 1.6V and 0.5A,Max1.0A.
 
A4988(2amp)
I= vref /0.8,default Vref 0.8V and 1.0A,Max2.0A.
 
DRV8825
I= vref *2, default 0.65A and 1.3A,Max 2.5A.
 
LV8729
I= vref /0.5, default 0.4A and 0.8A,Max 1.5A.
 
 
Following picture shows how to check the Vref.

 

 

 

rated current

 

 

 

Attention,please!

If one of your mainboard or LCD is not  produced by Makerbase or  from us,   

please make one connecting terminal refer to following way.

 

 

IMG_20170305_112529

 

 

 

IMG_20170305_112306_

Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item

Please according to you to buy the dress fabric, select the corresponding fabric color chart

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login