Your position: Home / Controller Kit

MKS SBASE+TFT35+WIFI+Runout sensor

K29
Price:
USD
$70.00
    Please select the information you wantX
  • size:
    SBASE-35-WIFI-Sensor
    SBASE-TFT35
Quantity:
-
+
(200 available)
  • Description
  • Reviews

 

Shipping List
 
Kit 1
 
1pcs * MKS SBASE  V1.3
1pcs * MKS TFT35
1pcs * MKS WIFI 
1pcs * Filament Sensor
3pcs * Endstop
1pcs * USB
1pcs * Falt cable
1pcs * Screwdriver
 
 
Kit 2
 
1pcs * MKS SBASE  V1.3
1pcs * MKS TFT35
 ​3pcs  * Endstop
1pcs * USB
1pcs * Falt cable
1pcs * Screwdriver
 
 
 
 
 
 
Name:    Smoothieboard MKS SBASE V1.3 
 
 
Features 
  • Support highly modular open source firmware Smoothieware.
  • Easy to edit config.txt file. No  complicate firmware editing necessary.
  • Fully supports network functionality. Besides the regular USB connection an Ethernet network cable can be connected directly to a network for browser control. Board IP address can be configure in config.txt.
  • Setcurrent directly on config ,protect  driver or potentiometer from getting burned when adjust the current.
  • This circuit board with high-quality 4-layer and better heatsink.
  • Using a dedicated power supply chip, stably ensure power output.
  (Please note that MKS SBASE can't work with OLED12864 and LCD2004 display.)

More features as following







Wiring





PINOUT


 How to use
 
1.Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
 . Need to change config name .

For example:
Change  21  into   23
.2. Adjust config.txt according to the configuration .
3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.
4.Plug the SD card to the board, after power on, it will automatic update .
5.If connect computer with USB, need to install the driver (Refer to below specification ).
 
Install the Driver
First, you should upload the zip file.
Then, plug the USB  to computer . Next, enter device manger .
Then will turn up COM after  install successfully.
 
Download  Firmware and Update
Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update .
After successful updated, the file name will turn into firmware.cur.
 

 

How to Adjust Driver Current
 
 
Following picture shows how to check the Vref.
 

 
 
 
 
rated current

 
 
 
Name: MKS TFT35 Touch Screen  
 
 
Features
1.  7 type languages online switching.
2. Preview G-code model, display model on printing.
3. Inbuilt 32 bit high speed ARM chip.
4. 3.5 inch touch screen, simple operating interface, high sensitivity.
5. Support WIFI remote control, you may monitor via  APP or PC.
  Available for Android and IOS system.
6. Easy to update firmware by SD card.
7. Easy to replace into your logo and customize 13 commands . 
8. Support printing from breakpoint,power cut detecting,printing save, 
     outage detecting and auto off  function.
9. Supports Marlin, Smoothieware.

 

TFT351TFT2






Wiring

 
 
Size





How to Wire Filament Sensor to MKS TFT35 

Wire on TFT35 PB1 pins.




 
Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login